|
Posted by Christopher Tidy on March 28, 2008, 4:37 pm
Please log in for more thread options
Hi folks,
I'm looking for a 1" square drive breaker bar, preferably about 4' long.
I can't find any searching online. Anyone know where I could buy one?
Best wishes,
Chris
|
|
Posted by :Jerry: on March 28, 2008, 5:28 pm
Please log in for more thread options
> Hi folks,
>
> I'm looking for a 1" square drive breaker bar, preferably about 4'
> long. I can't find any searching online. Anyone know where I could
> buy one?
>
Any dealer who stocks Sealey stuff should be able to help. Breaker Bar
1000mm 1"Sq Drive Product Code: AK7313. www.sealey.co.uk/
|
|
Posted by Christopher Tidy on March 28, 2008, 6:22 pm
Please log in for more thread options :Jerry: wrote:
>
>>Hi folks,
>>
>>I'm looking for a 1" square drive breaker bar, preferably about 4'
>>long. I can't find any searching online. Anyone know where I could
>>buy one?
>>
>
>
> Any dealer who stocks Sealey stuff should be able to help. Breaker Bar
> 1000mm 1"Sq Drive Product Code: AK7313. www.sealey.co.uk/
Thanks for the link. Plenty of online retailers have those. It seems a
little expensive for a Sealey product, though. I was under the
impression that Sealey don't make the best quality tools. This opinion
is based of a set of Sealey taps and dies I have, which suck. Perhaps
their product quality varies?
Anyone own the 1" breaker bar?
Best wishes,
Chris
|
|
Posted by hyweldavies on March 28, 2008, 6:55 pm
Please log in for more thread options wrote:
> :Jerry: wrote:
>
> >>Hi folks,
>
> >>I'm looking for a 1" square drive breaker bar, preferably about 4'
> >>long. I can't find any searching online. Anyone know where I could
> >>buy one?
>
> > Any dealer who stocks Sealey stuff should be able to help. Breaker Bar
> > 1000mm 1"Sq Drive Product Code: AK7313.www.sealey.co.uk/
>
> Thanks for the link. Plenty of online retailers have those. It seems a
> little expensive for a Sealey product, though. I was under the
> impression that Sealey don't make the best quality tools. This opinion
> is based of a set of Sealey taps and dies I have, which suck. Perhaps
> their product quality varies?
>
> Anyone own the 1" breaker bar?
>
> Best wishes,
>
> Chris
Try fleaby. There was a bloke selling lesser-brand, but still some
sort of brand 3/4" drives a metre long at any rate. He'd put up a fun
photo with his little girl holding it up - it was bigger than she was.
Hywel
|
|
Posted by Christopher Tidy on March 28, 2008, 7:05 pm
Please log in for more thread options hyweldavies wrote:
> wrote:
>
>>:Jerry: wrote:
>>
>>
>>>>Hi folks,
>>>
>>>>I'm looking for a 1" square drive breaker bar, preferably about 4'
>>>>long. I can't find any searching online. Anyone know where I could
>>>>buy one?
>>>
>>>Any dealer who stocks Sealey stuff should be able to help. Breaker Bar
>>>1000mm 1"Sq Drive Product Code: AK7313.www.sealey.co.uk/
>>
>>Thanks for the link. Plenty of online retailers have those. It seems a
>>little expensive for a Sealey product, though. I was under the
>>impression that Sealey don't make the best quality tools. This opinion
>>is based of a set of Sealey taps and dies I have, which suck. Perhaps
>>their product quality varies?
>>
>>Anyone own the 1" breaker bar?
>>
>>Best wishes,
>>
>>Chris
>
>
> Try fleaby. There was a bloke selling lesser-brand, but still some
> sort of brand 3/4" drives a metre long at any rate. He'd put up a fun
> photo with his little girl holding it up - it was bigger than she was.
I bought one of the 3/4" bars from that guy actually. It's okay. I
haven't broken or bent it yet. The finish on the black knuckle joint
could be better, but it was cheap, and he sells replacement knuckle joints.
I e-mailed him about 1" bars, but he doesn't have one. Looks like the
Sealey bar is probably my only option.
Best wishes,
Chris
|
| Similar Threads | Posted | | Circuit breaker problem | June 22, 2008, 11:04 am |
| Drive pin clearance | May 2, 2008, 6:04 am |
| Inverter/3-phase drive for my S7 | June 27, 2008, 6:59 am |
| Bridgeport table drive parts | February 1, 2008, 12:58 pm |
| Milling Machines and Drive Belts | April 21, 2008, 12:36 pm |
| Link belt drive rotation direction | April 6, 2008, 7:15 am |
| Spindle clamping, dividing heads and CNC drive. | April 6, 2008, 9:03 am |
| Parallel 'turning' a square bar | March 7, 2008, 5:59 am |
| Square 'Doweling' source? | April 28, 2008, 9:49 pm |
| Shear strength of 3/4" square steel? | August 10, 2006, 3:20 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> I'm looking for a 1" square drive breaker bar, preferably about 4'
> long. I can't find any searching online. Anyone know where I could
> buy one?
>