|
Posted by on May 12, 2008, 5:41 am
Please log in for more thread options > Hi, =A0has anyone taken the screwcutting gearbox off a Myford super 7 and
> can offer any suggestions. =A0I'm trying to strip the lathe down to get
> the bed and saddle reground so don't want to disassemble the gearbox if
> I don't need to.
>
> Bob12
>
> --
> bob12
> ------------------------------------------------------------------------
> bob12's Profile:http://www.rcgroups.com/forums/member.php?u=3D210019
> View this thread:http://www.rcgroups.com/forums/showthread.php?t=3D862582
Hi
There are three screws, two at the top under the cover and a third
which you reach by removing a plug in the front left hand side of the
gearbox below the slot. The screw should be accessable then.
If you look here you will find the manual for the gearbox and for the
lathe:
http://www.pilotltd.net/engineering.htm
regards
Keith
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> can offer any suggestions. I'm trying to strip the lathe down to get
> the bed and saddle reground so don't want to disassemble the gearbox if
> I don't need to.
>
> Bob12