|
Posted by Tony Jeffree on June 15, 2008, 1:04 pm
Please log in for more thread options
On Sun, 15 Jun 2008 06:58:55 -0700 (PDT), mark
>I had emailed the guy with this a couple of times asking weather it
>was NVR
>
>http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140180247435
>
>no replies
>
>Anyway ...Ive bought it
Well, I hope you have a use for a motor switch with built-in thermal
overload protection (and no, it doesn't have NVR) because that's what
you have bought.
Doesn't have a built in light either.
You can see the maker and model number in the second pic on the
listing - its a Ziehl-Abegg S-ET 10E. A couple of minutes of work on
Google, as I just did (indeed, considerably shorter than it took me to
write this) would have taken you to the manufacturer's website here:
http://ziehl-abegg.com/ww/fans-product-group-6.html?dtl=1
and the right products page here:
http://www.ziehl-abegg.com/ww/fans-product-group-6.html?dtl=1
and finally the PDF of the instructions for it here:
http://www.ziehl-abegg.com/ww/download-526.html
Whatever solution you finally end up with, its now cost you an extra
£9.50. I guess you could sell it again on Ebay...
Seems very odd to me that you would be reluctant to buy from RS, on a
site where you know they sell NVR devices and they do actually provide
you with all the spec information you need to select the right item if
you only take the trouble to look at it, and instead seem perfectly
prepared to spend a similar amount of money on an Ebay item where you
have absolutely no idea whether it is what you want, and the seller
has, by your own experience, been considerably less than helpful in
providing any information.
Regards,
Tony
|
|
Posted by mark on June 15, 2008, 1:24 pm
Please log in for more thread options
> On Sun, 15 Jun 2008 06:58:55 -0700 (PDT), mark
>
> >I had emailed the guy with this a couple of times asking weather it
> >was =A0NVR
>
> >http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3D140180247435
>
> >no replies
>
> >Anyway ...Ive bought it
>
> Well, I hope you have a use for a motor switch with built-in thermal
> overload protection (and no, it doesn't have NVR) because that's what
> you have bought.
>
> Doesn't have a built in light either.
>
> You can see the maker and model number in the second pic on the
> listing - its a Ziehl-Abegg S-ET 10E. A couple of minutes of work on
> Google, as I just did (indeed, considerably shorter than it took me to
> write this) would have taken you to the manufacturer's website here:
>
> http://ziehl-abegg.com/ww/fans-product-group-6.html?dtl=3D1
>
> and the right products page here:
>
> http://www.ziehl-abegg.com/ww/fans-product-group-6.html?dtl=3D1
>
> and finally the PDF of the instructions for it here:
>
> http://www.ziehl-abegg.com/ww/download-526.html
>
> Whatever solution you finally end up with, its now cost you an extra
> =A39.50. I guess you could sell it again on Ebay...
>
> Seems very odd to me that you would be reluctant to buy from RS, on a
> site where you know they sell NVR devices and they do actually provide
> you with all the spec information you need to select the right item if
> you only take the trouble to look at it, and instead seem perfectly
> prepared to spend a similar amount of money on an Ebay item where you
> have absolutely no idea whether it is what you want, and the seller
> has, by your own experience, been considerably less than helpful in
> providing any information.
>
> Regards,
> Tony
Yep made major goof there then ,...
I thought because internally it looked like it had a coil or
something
it could be one ..
I've taken many risks on ebay . the only way to get bargains these
days ...if someone described something right ..it goes for too much
money :(..this is my first ...one thats ended up no good then..luck
of the draw.
if i did look it up on google don't think i would understand weather
it was or not ...
how's about giving me a part number for an nvr on the rs site please .
all the best.markj
|
|
Posted by Tony Jeffree on June 15, 2008, 1:46 pm
Please log in for more thread options On Sun, 15 Jun 2008 10:24:01 -0700 (PDT), mark
>Yep made major goof there then ,...
>I thought because internally it looked like it had a coil or
>something
>
>it could be one ..
>
>I've taken many risks on ebay . the only way to get bargains these
>days ...if someone described something right ..it goes for too much
>money :(..this is my first ...one thats ended up no good then..luck
>of the draw.
>
>if i did look it up on google don't think i would understand weather
>it was or not ...
>
>how's about giving me a part number for an nvr on the rs site please .
Mark -
I've already given you all the pointers you need to figure it out. If
you can't figure it out from the information available to you, then
you are simply proving Bob M right...that there is some doubt (I would
say serious doubt) as to whether you should be doing this yourself.
Regards,
Tony
|
|
Posted by mark on June 15, 2008, 2:18 pm
Please log in for more thread options > On Sun, 15 Jun 2008 10:24:01 -0700 (PDT), mark
>
>
>
>
>
> >Yep made major goof there then ,...
> >I thought because internally it looked like it had a coil or
> >something
>
> >it could be one ..
>
> >I've taken many risks on ebay . the only way to get bargains these
> >days ...if someone described something right ..it goes for too much
> >money =A0:(..this is my first ...one thats ended up no good then..luck
> >of the draw.
>
> >if i did look it up on google don't think i would understand weather
> >it was or not ...
>
> >how's about giving me a part number for an nvr on the rs site please .
>
> Mark -
>
> I've already given you all the pointers you need to figure it out. If
> you can't figure it out from the information available to you, then
> you are simply proving Bob M right...that there is some doubt (I would
> say serious doubt) as to whether you should be doing this yourself.
>
> Regards,
> Tony- Hide quoted text -
>
> - Show quoted text -
OK thanks for being very helpful
Guess you dont want to take the risk of picking the wrong one out .
fare enough .
all the best.markj
|
|
Posted by Tony Jeffree on June 15, 2008, 3:06 pm
Please log in for more thread options On Sun, 15 Jun 2008 11:18:23 -0700 (PDT), mark
>Guess you dont want to take the risk of picking the wrong one out .
Which just proves for the second time today what a lousy guesser you
are.
Regards,
Tony
|
| Similar Threads | Posted | | Re: Light for My NVR Switch | June 14, 2008, 5:39 pm |
| Re: Light for My NVR Switch | June 15, 2008, 4:18 am |
| Milling a slot, with light equipment | February 25, 2008, 8:16 am |
| switch | October 14, 2006, 4:00 pm |
| Please Help Me Wire A Reversing Switch | June 12, 2008, 11:28 am |
| Dewhurst switch wiring diagram | September 10, 2006, 12:47 pm |
| Need Info Myford Rotary Switch box pre-1980 | August 20, 2008, 12:44 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>was NVR
>
>http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140180247435
>
>no replies
>
>Anyway ...Ive bought it