|
Posted by Emimec on January 6, 2008, 4:38 am
Please log in for more thread options
> Emimec wrote:
>>
>>>Emimec wrote:
>>>
>>>
>>>>
>>>>
>>>>>Emimec wrote:
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>On Fri, 4 Jan 2008 20:50:53 -0000, "Emimec"
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>A clay flower pot as well, held in the chuck with a lid held in
>>>>>>>>place with
>>>>>>>>the revolving taper in the tailstock, worked well until it broke,
>>>>>>>>and was
>>>>>>>>quieter.
>>>>>>>
>>>>>>>Well it would be quieter when the bits were scattered over the lathe
>>>>>>>bed and workshop floor rather than rattling around in a flower pot
>>>>>>>wouldn't it? :-)
>>>>>>>
>>>>>>
>>>>>>Dipstick... it didn't break on the lathe, it got broken when left on
>>>>>>the floor of the workshop.
>>>>>
>>>>>Wot you wrote. :-)
>>>>
>>>>Depends how you read it
>>>
>>>Only one way to read it, the way you wrote it.
>>
>> No problem then, makes sense. Not another launderette owner I hope?
> English, obviously not your first language.
Tom
Looking back at your previous posts, I see nothing other than sarcastic
replies. Why not join a failed comedian newsgroup instead of clogging this
one up.
|
|
Posted by Tom on January 6, 2008, 4:46 am
Please log in for more thread options
Emimec wrote:
>
>>Emimec wrote:
>>
>>>
>>>
>>>>Emimec wrote:
>>>>
>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Emimec wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>On Fri, 4 Jan 2008 20:50:53 -0000, "Emimec"
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>A clay flower pot as well, held in the chuck with a lid held in
>>>>>>>>>place with
>>>>>>>>>the revolving taper in the tailstock, worked well until it broke,
>>>>>>>>>and was
>>>>>>>>>quieter.
>>>>>>>>
>>>>>>>>Well it would be quieter when the bits were scattered over the lathe
>>>>>>>>bed and workshop floor rather than rattling around in a flower pot
>>>>>>>>wouldn't it? :-)
>>>>>>>>
>>>>>>>
>>>>>>>Dipstick... it didn't break on the lathe, it got broken when left on
>>>>>>>the floor of the workshop.
>>>>>>
>>>>>>Wot you wrote. :-)
>>>>>
>>>>>Depends how you read it
>>>>
>>>>Only one way to read it, the way you wrote it.
>>>
>>>No problem then, makes sense. Not another launderette owner I hope?
>>
>>English, obviously not your first language.
>
>
> Tom
> Looking back at your previous posts, I see nothing other than sarcastic
> replies. Why not join a failed comedian newsgroup instead of clogging this
> one up.
>
>
Only if you go to a remedial English composition newsgroup. :-)
|
|
Posted by Brad. on January 6, 2008, 12:38 pm
Please log in for more thread options
> Emimec wrote:
>
>>
>>>Emimec wrote:
>>>
>>>>
>>>>
>>>>>Emimec wrote:
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Emimec wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>On Fri, 4 Jan 2008 20:50:53 -0000, "Emimec"
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>A clay flower pot as well, held in the chuck with a lid held in
>>>>>>>>>>place with
>>>>>>>>>>the revolving taper in the tailstock, worked well until it broke,
>>>>>>>>>>and was
>>>>>>>>>>quieter.
>>>>>>>>>
>>>>>>>>>Well it would be quieter when the bits were scattered over the
>>>>>>>>>lathe
>>>>>>>>>bed and workshop floor rather than rattling around in a flower pot
>>>>>>>>>wouldn't it? :-)
>>>>>>>>>
>>>>>>>>
>>>>>>>>Dipstick... it didn't break on the lathe, it got broken when left on
>>>>>>>>the floor of the workshop.
>>>>>>>
>>>>>>>Wot you wrote. :-)
>>>>>>
>>>>>>Depends how you read it
>>>>>
>>>>>Only one way to read it, the way you wrote it.
>>>>
>>>>No problem then, makes sense. Not another launderette owner I hope?
>>>
>>>English, obviously not your first language.
>>
>>
>> Tom
>> Looking back at your previous posts, I see nothing other than sarcastic
>> replies. Why not join a failed comedian newsgroup instead of clogging
>> this one up.
> Only if you go to a remedial English composition newsgroup. :-)
Now, now girls, put your handbags away. Why not kiss and make up so
everyone goes home happy.
|
|
Posted by Tony Jeffree on January 6, 2008, 12:59 pm
Please log in for more thread options wrote:
>>>>English, obviously not your first language.
>>>
>>>
>>> Tom
>>> Looking back at your previous posts, I see nothing other than sarcastic
>>> replies. Why not join a failed comedian newsgroup instead of clogging
>>> this one up.
>> Only if you go to a remedial English composition newsgroup. :-)
>
>
>Now, now girls, put your handbags away. Why not kiss and make up so
>everyone goes home happy.
What - and spoil the spectator sport? <G>
Regards,
Tony
|
|
Posted by Emimec on January 6, 2008, 4:46 pm
Please log in for more thread options
Your use of the word Pommie, explains it all........ a bloody Aussie. The
only country who cant spell Piss, hence Castlemaine XXXX.
What criminal are you related to then...........
|
| Similar Threads | Posted | | Re: Small vibratory machine | January 6, 2008, 4:32 am |
| Re: Small vibratory machine | January 6, 2008, 6:31 am |
| Re: Small vibratory machine | January 6, 2008, 10:41 am |
| Re: Small vibratory machine | January 10, 2008, 6:34 am |
| Can anyone say anything about thius small lathe? | March 30, 2008, 4:55 am |
| Re: Small bargin and a request for help | August 21, 2006, 1:42 pm |
| Re: Small bargin and a request for help | August 21, 2006, 5:54 pm |
| Slittling very small screws | May 15, 2008, 4:34 pm |
| Re: Removing small roll pins | February 2, 2008, 5:55 pm |
| Small parts gold plating | September 25, 2006, 11:40 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap