|
Posted by wrigglymonkey on March 22, 2008, 3:42 pm
Please log in for more thread options
wrote:
> No, nothing to do with the date or season.
>
> I need a couple of tension springs, about 35mm long x 8mm diameter
> with hooks at both ends. For a throttle return application.
> Any suggestions as to where to look online that doesn't make me buy
> 250 of the little buggers?
>
> Thanks
>
> Charles
Burlen Fuel Systems. www.burlen.co.uk
Surprised you didn't know that though: am I missing something (more
than usual that is)?
Keith
|
|
Posted by Charles Ping on March 22, 2008, 5:09 pm
Please log in for more thread options
On Sat, 22 Mar 2008 12:42:55 -0700 (PDT), wrigglymonkey
>wrote:
>> No, nothing to do with the date or season.
>>
>> I need a couple of tension springs, about 35mm long x 8mm diameter
>> with hooks at both ends. For a throttle return application.
>> Any suggestions as to where to look online that doesn't make me buy
>> 250 of the little buggers?
>>
>> Thanks
>>
>> Charles
>
>Burlen Fuel Systems. www.burlen.co.uk
>Surprised you didn't know that though: am I missing something (more
>than usual that is)?
>Keith
Good try Keith. However my Burlen catalogues only show a spring 3"
long - too long for this job.
Looks like RS might be the place to go.
Thanks chaps
Charles
|
|
Posted by Bob Minchin on March 22, 2008, 5:29 pm
Please log in for more thread options Try here Charles
http://tinyurl.com/28myex
Minimum Qty 5 off £1.75 each
Bob
Charles Ping wrote:
> On Sat, 22 Mar 2008 12:42:55 -0700 (PDT), wrigglymonkey
>
>> wrote:
>>> No, nothing to do with the date or season.
>>>
>>> I need a couple of tension springs, about 35mm long x 8mm diameter
>>> with hooks at both ends. For a throttle return application.
>>> Any suggestions as to where to look online that doesn't make me buy
>>> 250 of the little buggers?
>>>
>>> Thanks
>>>
>>> Charles
>> Burlen Fuel Systems. www.burlen.co.uk
>> Surprised you didn't know that though: am I missing something (more
>> than usual that is)?
>> Keith
>
>
> Good try Keith. However my Burlen catalogues only show a spring 3"
> long - too long for this job.
> Looks like RS might be the place to go.
>
> Thanks chaps
>
> Charles
|
|
Posted by Tim Leech on March 22, 2008, 6:32 pm
Please log in for more thread options On Sat, 22 Mar 2008 21:09:18 +0000, Charles Ping
>On Sat, 22 Mar 2008 12:42:55 -0700 (PDT), wrigglymonkey
>
>>wrote:
>>> No, nothing to do with the date or season.
>>>
>>> I need a couple of tension springs, about 35mm long x 8mm diameter
>>> with hooks at both ends. For a throttle return application.
>>> Any suggestions as to where to look online that doesn't make me buy
>>> 250 of the little buggers?
>>>
>>> Thanks
>>>
>>> Charles
>>
>>Burlen Fuel Systems. www.burlen.co.uk
>>Surprised you didn't know that though: am I missing something (more
>>than usual that is)?
>>Keith
>
>
>Good try Keith. However my Burlen catalogues only show a spring 3"
>long - too long for this job.
It's not usually hard to shorten them
Tim
|
|
Posted by bigegg on March 26, 2008, 3:16 pm
Please log in for more thread options Charles Ping wrote:
> On Sat, 22 Mar 2008 12:42:55 -0700 (PDT), wrigglymonkey
>
>> wrote:
>>> No, nothing to do with the date or season.
>>>
>>> I need a couple of tension springs, about 35mm long x 8mm diameter
>>> with hooks at both ends. For a throttle return application.
>>> Any suggestions as to where to look online that doesn't make me buy
>>> 250 of the little buggers?
JTF cash&carry do a box of mixed springs for a couple of quid - about
200 in it - <http://www.jtf-wholesale.co.uk/>
trade only, (supposedly) and it's a 10 quid minimum,
but I never have any trouble :.) -
they do an extensive range of chiwanese consumables like
drill bits (0.5 -13mm for 3 quid),
angle grinder disks (3 quid for 10 4 1/2 in)
or take SWMBO to top up with bog roll and bleach :.)
--
BigEgg
Hack to size. Hammer to fit. Weld to join. Grind to shape. Paint to cover.
http://www.workshop-projects.com -
Plans and free books - *Now with forum*
|
| Similar Threads | Posted | | Re: Spring source | March 22, 2008, 2:31 pm |
| Re: Spring source | March 22, 2008, 7:12 pm |
| Re: Spring source | March 23, 2008, 5:05 am |
| Re: Spring source | March 25, 2008, 2:14 pm |
| Re: Spring Steel | January 6, 2008, 3:12 pm |
| Flexible connection with spring innside | August 11, 2006, 2:50 pm |
| Square 'Doweling' source? | April 28, 2008, 9:49 pm |
| Tungsten wire source? | September 7, 2008, 8:33 pm |
| (slightly OT) copper disc source? | April 24, 2008, 8:21 am |
| Source of 2mm and 2.5mm socket head screws | April 25, 2008, 4:01 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> I need a couple of tension springs, about 35mm long x 8mm diameter
> with hooks at both ends. For a throttle return application.
> Any suggestions as to where to look online that doesn't make me buy
> 250 of the little buggers?
>
> Thanks
>
> Charles