|
Posted by Steve W on February 14, 2007, 3:07 am
Please log in for more thread options
>
> "Steve W" <steve> wrote in message
>>
>> wrote in message
>>> Hi,
>>>
>>> I'm looking for some (Stainless preferred) M8 threaded rod with a
>>> left-hand 1.0mm pitch. Google hasn't turned up anything....
>>>
>>> Anyone know of a supplier for one 1000mm long?
>>>
>>> Cheers,
>>>
>>> Michael
>>>
>> Michael,
>>
>> Since you are scratch building this it might be easier to change the
>> design?
>>
>> Do you really really need a thread length of 1000mm? Or would a metre
>> rod threaded 25mm either end do?
>> Really really need stainless?
>> Why is 1mm thread crticial to the design?
>>
>> Regards
>>
>> Steve
>>
>>
> As John said it for the longitunidinal leadscrew on a Unimat SL so the
> specs are out of my hands.
>
> For my subs, you have a acrylic water tight cylinder (WTC) that has to be
> true at both ends. My subs require WTCs that are around 700-800mm long and
> so I'm looking to extend the bed so it can handle 900mm tubes.
>
> And the reason I said stainless is purely 'cause I don't want it going
> rusty so that can be ordinary steel....
>
> Michael
>
What's your budget for getting one made? (An appropriate steel, not
stainless)
Steve
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> "Steve W" <steve> wrote in message