Removing a reluctant chuck from an ML7

Model Engineering in UK - Model engineering, metal crafts in UK 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Removing a reluctant chuck from an ML7 Dragon 06-10-2008
Posted by Mark Rand on June 13, 2008, 6:02 pm
Please log in for more thread options
On Fri, 13 Jun 2008 21:16:13 +0100, "Dragon"


>Not enough room for me to get enough speed to make that work either.
>Must be missing something so looking for enlightenment!
>
>Henry
>


Enlightenment thusly:-

Myford's recommended practice involves the use of the electric motor in
reverse. This dramatically reduces the likelyhood of trapping fingers between
belt and pulley.


Mark Rand
RTFM

Posted by Dragon on June 14, 2008, 5:53 am
Please log in for more thread options

> On Fri, 13 Jun 2008 21:16:13 +0100, "Dragon"
>
>
>>Not enough room for me to get enough speed to make that work either.
>>Must be missing something so looking for enlightenment!
>>
>>Henry
>>
>
>
> Enlightenment thusly:-
>
> Myford's recommended practice involves the use of the electric motor in
> reverse. This dramatically reduces the likelyhood of trapping fingers
> between
> belt and pulley.
>
>
> Mark Rand
> RTFM

Thank ye kindly young sur.
Tis truly a wondrous idea.

What's more it works!
Had spotted the potential for trapping fingers which no doubt inhibited my
puny attempts by hand.

Henry



Posted by Tony Jeffree on June 14, 2008, 9:35 am
Please log in for more thread options
On Sat, 14 Jun 2008 10:53:54 +0100, "Dragon"

>Had spotted the potential for trapping fingers

Reminds me of the old camel joke...

Regards,
Tony

Posted by Steve on June 14, 2008, 10:28 am
Please log in for more thread options

> On Sat, 14 Jun 2008 10:53:54 +0100, "Dragon"
>
>>Had spotted the potential for trapping fingers
>
> Reminds me of the old camel joke...
>
> Regards,
> Tony

Go on then, don't keep us in suspense!



Posted by Chris Edwards on June 14, 2008, 12:02 pm
Please log in for more thread options
wrote:

>
>> On Sat, 14 Jun 2008 10:53:54 +0100, "Dragon"
>>
>>>Had spotted the potential for trapping fingers
>>
>> Reminds me of the old camel joke...
>>
>> Regards,
>> Tony
>
>Go on then, don't keep us in suspense!

>
...groan......no! Don't.....unless it's a new joke about an old camel...?
--

Chris Edwards (in deepest Dorset) "....there *must* be an easier way!"


Similar ThreadsPosted
Re: Removing my drilling chuck June 15, 2008, 4:06 pm
Re: Removing my drilling chuck June 16, 2008, 3:36 am
Re: Removing my drilling chuck June 16, 2008, 6:31 pm
Re: Removing my drilling chuck June 18, 2008, 4:57 pm
Re: Removing my drilling chuck June 21, 2008, 3:42 am
Removing a toolpost August 23, 2006, 9:25 am
Removing a broken tap June 8, 2008, 5:59 am
removing ballnuts September 16, 2008, 11:35 pm
Re: Removing small roll pins February 2, 2008, 5:55 pm
Help with Myford chuck February 5, 2008, 2:00 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap