Source for good steel blank?

Home| Search | About
User Password
Register Now! Lost Password?

Model Engineering in UK - Model engineering, metal crafts in UK 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Source for good steel blank? Peter Fairbrother 05-07-2008
Posted by Peter Fairbrother on May 7, 2008, 11:11 am
Please log in for more thread options
 I'm looking for a reasonable (eg en9 or en24 or so, something better
than mild steel - it's for a collet chuck) steel blank, 80 mm diameter
and 40 mm long.

Any ideas?

Thanks,

-- Peter Fairbrother

Posted by Christopher Tidy on May 7, 2008, 1:11 pm
Please log in for more thread options
 Peter Fairbrother wrote:
> I'm looking for a reasonable (eg en9 or en24 or so, something better
> than mild steel - it's for a collet chuck) steel blank, 80 mm diameter
> and 40 mm long.

These people keep some steel blanks:
http://www.hpcgears.com/

You're probably best calling them and asking for a catalogue. It's much
more detailed than their website.

Best wishes,

Chris


Posted by Mark Rand on May 7, 2008, 1:44 pm
Please log in for more thread options
wrote:

>I'm looking for a reasonable (eg en9 or en24 or so, something better
>than mild steel - it's for a collet chuck) steel blank, 80 mm diameter
>and 40 mm long.
>
>Any ideas?
>
>Thanks,
>
>-- Peter Fairbrother


Would 95mm dia Black EN24T do?

Do we have anyone from your neck of the woods going to Harrogate, or should I
post it?


Mark Rand
RTFM

Posted by Peter Fairbrother on May 7, 2008, 4:16 pm
Please log in for more thread options
Mark Rand wrote:
> wrote:
>
>> I'm looking for a reasonable (eg en9 or en24 or so, something better
>> than mild steel - it's for a collet chuck) steel blank, 80 mm diameter
>> and 40 mm long.
>>
>> Any ideas?
>>
>> Thanks,
>>
>> -- Peter Fairbrother
>
>
> Would 95mm dia Black EN24T do?

Yummy, if my chuck will take it :)

>
> Do we have anyone from your neck of the woods going to Harrogate, or should I
> post it?

I'm in Trowbridge, Wilts ... can't make it myself though

Will email you tomorrow, and many thanks,


-- Peter Fairbrother

Similar ThreadsPosted
3/8" ground steel bar (silver steel) March 7, 2008, 12:02 pm
Re: Spring source March 22, 2008, 2:31 pm
Re: Spring source March 22, 2008, 3:42 pm
Re: Spring source March 22, 2008, 7:12 pm
Re: Spring source March 23, 2008, 5:05 am
Re: Spring source March 25, 2008, 2:14 pm
Square 'Doweling' source? April 28, 2008, 9:49 pm
(slightly OT) copper disc source? April 24, 2008, 8:21 am
Source of 2mm and 2.5mm socket head screws April 25, 2008, 4:01 pm
Key steel February 9, 2008, 11:41 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap