|
Posted by Trevor Jones on May 30, 2008, 12:30 am
Please log in for more thread options _ wrote:
> On Thu, 29 May 2008 13:01:00 GMT, Trevor Jones wrote:
>
>
>>lfoggy wrote:
>>
>>
>>>Thanks for pointing that out. I'd never heard of this method of tool
>>>holding but it certainly seems to have advantages. I particularly like
>>>the idea of using round HSS blanks to make accurate round nosed tools.
>>>Has anyone used one of these in anger ? Obvious question is does the
>>>tool ever slip down the holder due to the cutting forces ?
>>>
>>>
>>
>> If the tool slips, it moves away from the part, rather than digging in.
>>
>> FWIW, the rather crudely built unit that I made, uses one 1/4" screw
>>to clamp the tool. and I have stalled the 3/4 HP motor on my S7 without
>>moving the bit in the holder.
>>
>
>
> Links to pictures would be clicked. Can you do them?
I'll dig them out and post them where they can be seen.
http://metalworking.com/dropbox/tangential_toolholder_good.txt
http://metalworking.com/dropbox/tangential_toolholder1small.JPG
http://metalworking.com/dropbox/tangential_toolholder2small.JPG
http://metalworking.com/dropbox/tangential_toolholder3small.JPG
http://metalworking.com/dropbox/tangential_toolholder4small.JPG
That about covers it.
Not fancy, but has served me for a bit over ten years now.
Cheers
Trevor Jones
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> holding but it certainly seems to have advantages. I particularly like
> the idea of using round HSS blanks to make accurate round nosed tools.
> Has anyone used one of these in anger ? Obvious question is does the
> tool ever slip down the holder due to the cutting forces ?
>
>