|
Posted by mikecb1 on July 23, 2008, 7:23 am
Please log in for more thread options
I was recently given some as-new taper shank milling cutters (ex MoD I
believe), and I am at a loss to know how to use them!
They are 3/8, 7/16 and 1/2 inch, with 6 flutes, and cutting lengths of
around 2 inches. The shanks have Brown and Sharpe tapers, with tangs
(no draw bar threads).
With some effort I can convert B&S to MT2, and drill and tap them for
a draw bar, but I wonder how they are intended to be used (and why
they all have such long cutting lengths).
Any ideas appreciated.
Mike
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap