|
Posted by Lionel on September 15, 2006, 3:07 pm
Please log in for more thread options
> I have a couple of vibratory finishing machines, the polyurethane lining is
coming out of them and they need relining.
>
> The smaller one has been knocking, took the bowl off and found the mountings
had cracked the vibration through the
> cracks must have caused the knocking sound.
>
> Bolted back up with large washers across the cracks and now works OK running
silent as originally bought new. This is
> temporary repair, so called Invicta in Halifax to see about buying a new bowl.
Was told by the salesman there that
they
> kept no spares, and had not made this small machine for some years due to
cheaper models coming in from Turkey.
>
> Actually not a big job to make and new bowl, if I had a set of sheet rollers,
and a bending press.
>
> So to the point,
>
> 1 Who is importing these cheap vibrating bowls
>
> 2 Anyone selling one? Auctions etc. Found these in auctions in the past
with worn out bowls, have them relined and
> they work as new.
>
> Mine are all troughs, not used the donut shaped round bowls, so don't know if
they might be faster.
>
> Deburring and polishing stainless steel.
>
> Cheers
>
> Lionel
>
>
>
>
>
> --
> **********************************************************************
> All Messages scanned by Norton Antivirus Professional 2004
> www.tattoo.co.uk
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap