involute gear question

Model Engineering in UK - Model engineering, metal crafts in UK 

Bookmark this page:   Yahoo!   Google   Windows Live   del.icio.us   digg   Netscape

Subject Author Date involute gear question etpm 08-01-2008
Posted by on August 1, 2008, 1:36 pm Please log in for more thread options Reading Ivan Law's book about gears again I see that the line of action increases in length as the pressure angle increases. Does increasing the pressure angle also increase the center to center tolerance of smooth running meshing gears? Thanks, Eric Similar Threads Posted Gear Cutting February 28, 2008, 4:16 am Ignorance about gear cutters please help! February 13, 2007, 1:53 am Problem Cutting 12 tooth Spur Gear August 3, 2008, 1:54 pm differance between 14.5 and 20 degree Pressure angle gear cutters January 20, 2008, 6:33 pm Making Gear Cutters (Ivan Laws Book) June 15, 2008, 6:30 am Making a replacement gear for thread dial indicator July 16, 2008, 7:39 pm This is probably a daft question January 20, 2008, 10:05 am Threading question February 4, 2008, 12:33 pm Warco VMC question April 7, 2008, 12:34 pm New Lathe question April 24, 2008, 7:15 am