|
Posted by Dudley Simons on July 4, 2008, 7:23 am
Please log in for more thread options
Morning All
I have been lurking here for a while and am not entirely sure if it is
permissable to post an advert - but here goes
I have just aquired around 400kg+ of bright steel - flat and round,
smallish sizes inch by quarter, inch and a quarter by a quarter, three
quarter square, three quarter dia, inch dia etc. It is in lengths up to
6 feet long. There is also a couple of pieces of six inch by quarter
bright and six inch by eigth black.
The steel is currently located in the CB4 post code area just north of
Cambridge.
It is available as a single lot - I can email a coupole of photos to
anyone who is seriously interested in it.
The asking price is £100. I reckon there is about £700 worth based on
Parker Steels prices.
I aquired the steel when I went to clear a load of scrap from a workshop
only to find that it was all good stock and not really scrap at all!
Its too good to send to the scrap yard where it will make about 50 quid
maybe 60 quid if the price keeps going up, but if it doesn't sell -
thats where it will be going :o( At £100 it is cheap enough to make
gates out of!
Please remove THE OBVIOUS to reply
regards
Dudley
|
|
Posted by magwych on July 6, 2008, 5:27 am
Please log in for more thread options
Hi Dudley,
Could you please e-mail me a couple of photos, to give me a
clearer insight, as am extremely interested.
Regards,
Wilf.
--
magwych
------------------------------------------------------------------------
magwych's Profile: http://www.rcgroups.com/forums/member.php?u=214948
View this thread: http://www.rcgroups.com/forums/showthread.php?t=888961
|
|
Posted by Mark Rand on July 6, 2008, 10:06 am
Please log in for more thread options wrote:
>
>Hi Dudley,
>Could you please e-mail me a couple of photos, to give me a
>clearer insight, as am extremely interested.
>Regards,
>Wilf.
Sorry. Picked it up this morning.
You _can_ get 400kg of steel and a couple of sacks of cement in a Rover 100
and still drive it, having taken most of the seats out first...
Mark Rand
RTFM
|
|
Posted by Dudley Simons on July 7, 2008, 4:51 am
Please log in for more thread options Morning All
Sorry for not posting sooner but I have had issues with newsgroup access
and NTL/Virgin at home and had to wait until I was in the office to post :o(
Thanks to everyone who mailed and was interested in the steel I had for
rehoming.
Mark came to collect the steel yesterday morning and I can indeed
confirm that it all went into a Rover Metro!
regards
Dudley
Dudley Simons wrote:
> Morning All
>
> I have been lurking here for a while and am not entirely sure if it is
> permissable to post an advert - but here goes
>
> I have just aquired around 400kg+ of bright steel - flat and round,
> smallish sizes inch by quarter, inch and a quarter by a quarter, three
> quarter square, three quarter dia, inch dia etc. It is in lengths up to
> 6 feet long. There is also a couple of pieces of six inch by quarter
> bright and six inch by eigth black.
>
> The steel is currently located in the CB4 post code area just north of
> Cambridge.
>
> It is available as a single lot - I can email a coupole of photos to
> anyone who is seriously interested in it.
>
> The asking price is £100. I reckon there is about £700 worth based on
> Parker Steels prices.
>
> I aquired the steel when I went to clear a load of scrap from a workshop
> only to find that it was all good stock and not really scrap at all!
> Its too good to send to the scrap yard where it will make about 50 quid
> maybe 60 quid if the price keeps going up, but if it doesn't sell -
> thats where it will be going :o( At £100 it is cheap enough to make
> gates out of!
>
>
> Please remove THE OBVIOUS to reply
>
>
>
> regards
>
>
>
> Dudley
|
|
Posted by Tony Jeffree on July 7, 2008, 10:54 am
Please log in for more thread options On Mon, 07 Jul 2008 09:51:30 +0100, Dudley Simons
>Mark came to collect the steel yesterday morning and I can indeed
>confirm that it all went into a Rover Metro!
Probably the first time in its life that its had a decent chassis <G>
Regards,
Tony
|
| Similar Threads | Posted | | "Elidir" for sale | August 13, 2006, 5:26 pm |
| Aladdins Cave for Sale | February 25, 2008, 3:16 pm |
| Guy Fawkers printer for sale - 1p | June 11, 2008, 7:11 am |
| For Sale: Tubular Heaters 80W 240V | September 18, 2006, 7:31 am |
| 3/8" ground steel bar (silver steel) | March 7, 2008, 12:02 pm |
| Key steel | February 9, 2008, 11:41 am |
| Re: Spring Steel | January 6, 2008, 3:12 pm |
| Re: 10 BA (or 1.7mm) Countersunk Steel Screws? | January 15, 2008, 8:48 am |
| Re: 10 BA (or 1.7mm) Countersunk Steel Screws? | January 15, 2008, 8:49 am |
| Stainless Steel mirror | October 8, 2006, 4:52 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>Hi Dudley,
>Could you please e-mail me a couple of photos, to give me a
>clearer insight, as am extremely interested.
>Regards,
>Wilf.