|
Posted by Harry on July 1, 2007, 11:46 pm
Please log in for more thread options Thanks for your thoughts Martin.
http://crosman.com/site/listing/1306
This is what I am trying to duplicate as far as the target is concerned.
I am troubled that .125 steel would have too much inertia for a co2 rifle to
knock it down? What can you tell me about this? Do you have anything close
to the Crossman target?
Thanks
> Being a target maker I would TIG or MIG it.
> Brazing might not stand up under repeated impacts.
>
> Glad you are talking air - I assume that anyway -
> Normally air is done in 1/8" or 11 ga. but anything goes out of
> the competition arena.
>
> Martin
>
> Martin H. Eastburn
> @ home at Lions' Lair with our computer lionslair at consolidated dot net
> TSRA, Life; NRA LOH & Endowment Member, Golden Eagle, Patriot"s Medal.
> NRA Second Amendment Task Force Charter Founder
> IHMSA and NRA Metallic Silhouette maker & member.
> http://lufkinced.com/
>
>
> Harry wrote:
>> I am making a speed shooting target setup for semi-automatic air rifle.
>> I am using 16ga steel 3" squares attached to 5ga steel wire. Would you
>> Tig or Braze the parts together? I know the lead pellets should work
>> harden the joint so which process will hold up better over the long run?
>>
>>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet
> News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
> Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
> =----
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> am using 16ga steel 3" squares attached to 5ga steel wire. Would you Tig or
> Braze the parts together? I know the lead pellets should work harden the
> joint so which process will hold up better over the long run?