FS Coolmate 4

Welding Forums - Welding of materials for manufacture & repair. 

Bookmark this page:   Yahoo!   Google   Windows Live   del.icio.us   digg   Netscape

Subject Author Date FS Coolmate 4 Rob Fraser 03-28-2008  Re: FS Coolmate 4 Ignoramus17370 03-28-2008  Re: FS Coolmate 4 Rob Fraser 03-28-2008  Re: FS Coolmate 4 Gunner 03-28-2008  Re: FS Coolmate 4 Rob Fraser 03-28-2008  Re: FS Coolmate 4 Gunner 03-28-2008  Re: FS Coolmate 4 Rob Fraser 03-28-2008  Re: FS Coolmate 4 Gunner 03-29-2008
Posted by Gunner on March 28, 2008, 2:39 pm Please log in for more thread options On Fri, 28 Mar 2008 13:24:31 -0500, "Rob Fraser" <FraserRacing"AT"RobFraser.Net> wrote: > >> On Fri, 28 Mar 2008 12:38:06 -0500, "Rob Fraser" >> <FraserRacing"AT"RobFraser.Net> wrote: >> >>>Anyone have use for a Coolmate 4 (blue) it's used and paid it's dues but >>>in >>>fine working order. I rebuilt the pump (Carbonator) out of preventative >>>maint. and it's just in the way. Located in Chicago or Joliet. $300.00 >>>No >>>lugs, just the in/out reverse thread on the inlet side. Adapters will be >>>needed. My new unit has one built in and this needs a good happy home. >>>120vac 60hz >>> I have some Diamondback torches available for it too, new in the box >>> but >>>I don't have a price on them yet. >>> >>> Rob >>> >>> >>>Fraser Competition Engines >>>Chicago, IL. >>> >> Rob, the Diamondbacks..air or water cooled? And do they use standard >> WP type consumables? >> >> Gunner > >Gunner, > I have both. I prefer the DB torches I usually snag them up on EBay if I >see one new in box and reasonable. WP stuff works. The only problem I have >had is with a Pyrex cup. Still don't have one as it's not easy to find. >because of the Teflon ring outside the torch face where the cup spins up to. >Other than that problem #17's have been no issue. Two of the water cooled >ones have really nice handles and are very easy to manipulate even with the >cable saver on. I got a smaller water cooled one too that is NIB I am just >looking for a reason to use. I just need to snatch up some spare parts for >it. I think in total I have about a dozen torches and two have been used. >Like I said, I am one weird dude..... > > Rob > Reason I asked..Im setting up a Ranger 9 for multiprocess, Ive got (and not hooked up yet) a LN-8 wire feeder, and a gentleman is sending me a HF box. I already have a pedal for tig, so with the HF box, Im going to likely be needing a torch. Ive got a WP18, but its a big bastard and water cooled, and didnt want to complicate things by putting a water cooler along with everything else thats going on the modified utility body trailer that Im turning into a full field service rig. I might be interested in an air cooled torch, depending on price, phases of the moon and so forth <G> Ive got to figure out why the Ranger isnt charging the battery, and why it wont automatically speed up when striking an arc. Ive been using it with manual Hi-run switch. Gunner Posted by Rob Fraser on March 28, 2008, 2:41 pm Please log in for more thread options > On Fri, 28 Mar 2008 13:24:31 -0500, "Rob Fraser" > <FraserRacing"AT"RobFraser.Net> wrote: > >> >>> On Fri, 28 Mar 2008 12:38:06 -0500, "Rob Fraser" >>> <FraserRacing"AT"RobFraser.Net> wrote: >>> >>>>Anyone have use for a Coolmate 4 (blue) it's used and paid it's dues but >>>>in >>>>fine working order. I rebuilt the pump (Carbonator) out of preventative >>>>maint. and it's just in the way. Located in Chicago or Joliet. >>>>$300.00 >>>>No >>>>lugs, just the in/out reverse thread on the inlet side. Adapters will be >>>>needed. My new unit has one built in and this needs a good happy home. >>>>120vac 60hz >>>> I have some Diamondback torches available for it too, new in the box >>>> but >>>>I don't have a price on them yet. >>>> >>>> Rob >>>> >>>> >>>>Fraser Competition Engines >>>>Chicago, IL. >>>> >>> Rob, the Diamondbacks..air or water cooled? And do they use standard >>> WP type consumables? >>> >>> Gunner >> >>Gunner, >> I have both. I prefer the DB torches I usually snag them up on EBay if >> I >>see one new in box and reasonable. WP stuff works. The only problem I >>have >>had is with a Pyrex cup. Still don't have one as it's not easy to find. >>because of the Teflon ring outside the torch face where the cup spins up >>to. >>Other than that problem #17's have been no issue. Two of the water cooled >>ones have really nice handles and are very easy to manipulate even with >>the >>cable saver on. I got a smaller water cooled one too that is NIB I am >>just >>looking for a reason to use. I just need to snatch up some spare parts for >>it. I think in total I have about a dozen torches and two have been used. >>Like I said, I am one weird dude..... >> >> Rob >> > Reason I asked..Im setting up a Ranger 9 for multiprocess, Ive got > (and not hooked up yet) a LN-8 wire feeder, and a gentleman is sending > me a HF box. I already have a pedal for tig, so with the HF box, Im > going to likely be needing a torch. Ive got a WP18, but its a big > bastard and water cooled, and didnt want to complicate things by > putting a water cooler along with everything else thats going on the > modified utility body trailer that Im turning into a full field > service rig. > > I might be interested in an air cooled torch, depending on price, > phases of the moon and so forth <G> > > Ive got to figure out why the Ranger isnt charging the battery, and > why it wont automatically speed up when striking an arc. Ive been > using it with manual Hi-run switch. > > Gunner Deduct it from my plane ticket and I'll hand deliver it but your stuck with me for a week!!!!! Rob Posted by Gunner on March 29, 2008, 2:54 am Please log in for more thread options On Fri, 28 Mar 2008 13:41:29 -0500, "Rob Fraser" <FraserRacing"AT"RobFraser.Net> wrote: > >> On Fri, 28 Mar 2008 13:24:31 -0500, "Rob Fraser" >> <FraserRacing"AT"RobFraser.Net> wrote: >> >>> >>>> On Fri, 28 Mar 2008 12:38:06 -0500, "Rob Fraser" >>>> <FraserRacing"AT"RobFraser.Net> wrote: >>>> >>>>>Anyone have use for a Coolmate 4 (blue) it's used and paid it's dues but >>>>>in >>>>>fine working order. I rebuilt the pump (Carbonator) out of preventative >>>>>maint. and it's just in the way. Located in Chicago or Joliet. >>>>>$300.00 >>>>>No >>>>>lugs, just the in/out reverse thread on the inlet side. Adapters will be >>>>>needed. My new unit has one built in and this needs a good happy home. >>>>>120vac 60hz >>>>> I have some Diamondback torches available for it too, new in the box >>>>> but >>>>>I don't have a price on them yet. >>>>> >>>>> Rob >>>>> >>>>> >>>>>Fraser Competition Engines >>>>>Chicago, IL. >>>>> >>>> Rob, the Diamondbacks..air or water cooled? And do they use standard >>>> WP type consumables? >>>> >>>> Gunner >>> >>>Gunner, >>> I have both. I prefer the DB torches I usually snag them up on EBay if >>> I >>>see one new in box and reasonable. WP stuff works. The only problem I >>>have >>>had is with a Pyrex cup. Still don't have one as it's not easy to find. >>>because of the Teflon ring outside the torch face where the cup spins up >>>to. >>>Other than that problem #17's have been no issue. Two of the water cooled >>>ones have really nice handles and are very easy to manipulate even with >>>the >>>cable saver on. I got a smaller water cooled one too that is NIB I am >>>just >>>looking for a reason to use. I just need to snatch up some spare parts for >>>it. I think in total I have about a dozen torches and two have been used. >>>Like I said, I am one weird dude..... >>> >>> Rob >>> >> Reason I asked..Im setting up a Ranger 9 for multiprocess, Ive got >> (and not hooked up yet) a LN-8 wire feeder, and a gentleman is sending >> me a HF box. I already have a pedal for tig, so with the HF box, Im >> going to likely be needing a torch. Ive got a WP18, but its a big >> bastard and water cooled, and didnt want to complicate things by >> putting a water cooler along with everything else thats going on the >> modified utility body trailer that Im turning into a full field >> service rig. >> >> I might be interested in an air cooled torch, depending on price, >> phases of the moon and so forth <G> >> >> Ive got to figure out why the Ranger isnt charging the battery, and >> why it wont automatically speed up when striking an arc. Ive been >> using it with manual Hi-run switch. >> >> Gunner > > >Deduct it from my plane ticket and I'll hand deliver it but your stuck with >me for a week!!!!! > > Rob > Hell..Id be honored to ferry you around for a week. Gunner