|
Posted by RDF on May 16, 2006, 12:31 am
Please log in for more thread options
Joliet IL. pickup only. Here is the link on Craig's List.
http://chicago.craigslist.org/tls/161236760.html
Fraser Competition Engines
Chicago, IL.
|
|
Posted by Ignoramus29705 on May 16, 2006, 1:19 am
Please log in for more thread options
RDF, is is possible to connect this welder's generator to an electric
motor? (to make it into a motor generator, like those of yesteryear).
i
> Joliet IL. pickup only. Here is the link on Craig's List.
>
> http://chicago.craigslist.org/tls/161236760.html
>
>
>
>
> Fraser Competition Engines
> Chicago, IL.
>
>
>
|
|
Posted by RDF on May 16, 2006, 4:53 am
Please log in for more thread options Igor,
I don't see why not. It would be easy enough to put a pillowblock and
shaft on the end or make a direct drive coupler.
Neat idea,
Rob
Fraser Competition Engines
Chicago, IL.
> RDF, is is possible to connect this welder's generator to an electric
> motor? (to make it into a motor generator, like those of yesteryear).
>
> i
>
>> Joliet IL. pickup only. Here is the link on Craig's List.
>>
>> http://chicago.craigslist.org/tls/161236760.html
>>
>>
>>
>>
>> Fraser Competition Engines
>> Chicago, IL.
>>
>>
>>
>
|
|
Posted by Gunner on May 16, 2006, 6:11 am
Please log in for more thread options wrote:
>Igor,
> I don't see why not. It would be easy enough to put a pillowblock and
>shaft on the end or make a direct drive coupler.
>
> Neat idea,
>
> Rob
>
>Fraser Competition Engines
>Chicago, IL.
Ive probably got all the stuff to do it with, if Iggy has the time and
wants to do it. Ill send what he needs for the shipping costs
Unless he wants to make a road trip and sort through the Stacks O
Stuff. Belts too.
Gunner
>
>> RDF, is is possible to connect this welder's generator to an electric
>> motor? (to make it into a motor generator, like those of yesteryear).
>>
>> i
>>
>>> Joliet IL. pickup only. Here is the link on Craig's List.
>>>
>>> http://chicago.craigslist.org/tls/161236760.html
>>>
>>>
>>>
>>>
>>> Fraser Competition Engines
>>> Chicago, IL.
>>>
>>>
>>>
>>
>
"If thy pride is sorely vexed when others disparage your offering, be
as lamb's wool is to cold rain and the Gore-tex of Odin's raiment
is to gullshit in the gale, for thy angst shall vex them not at
all. Yea, they shall scorn thee all the more. Rejoice in
sharing what you have to share without expectation of adoration,
knowing that sharing your treasure does not diminish your treasure
but enriches it."
- Onni 1:33
|
|
Posted by wayne mak on May 16, 2006, 6:16 am
Please log in for more thread options The motor supports the gen rotor, so your pillow block would need to be VERY
accurate. Also the gen, floats on the whole welder frame so the pillow block
would require you to machine a flange that bolts to the 4 raial support arms
NOT the frame/base of the welder. Another issue is that welder balances like
a seasaw with the motor weight so you would need to keep it abouth the same
weight. JUst to make matters even harder, the rotor shaft is fitted to a
flex plate that fits to a taper shaft motor, all of which I think you would
need to keep in place, there si no room for a bearing o the rotor. I was
going to put a 2 cylinder wisconsin on one of these and decided it better
not to. The motor is a big paer of the structure, it could be done but alot
of work.
> Igor,
> I don't see why not. It would be easy enough to put a pillowblock and
> shaft on the end or make a direct drive coupler.
>
> Neat idea,
>
> Rob
>
> Fraser Competition Engines
> Chicago, IL.
>
>> RDF, is is possible to connect this welder's generator to an electric
>> motor? (to make it into a motor generator, like those of yesteryear).
>>
>> i
>>
>> wrote:
>>> Joliet IL. pickup only. Here is the link on Craig's List.
>>>
>>> http://chicago.craigslist.org/tls/161236760.html
>>>
>>>
>>>
>>>
>>> Fraser Competition Engines
>>> Chicago, IL.
>>>
>>>
>>>
>>
>
>
|
| Similar Threads | Posted | | FS: Miller M-25 MIG gun | June 8, 2008, 5:04 pm |
| Miller 212 vs 252 | July 11, 2008, 12:06 am |
| Re: Anyone need a Miller Synchrowave 250??? | April 9, 2007, 12:21 pm |
| Miller Roughneck 2E/2F? | November 13, 2007, 7:02 pm |
| Tombstone or miller | April 26, 2006, 11:24 am |
| Miller MIG question | April 12, 2008, 12:34 am |
| Miller Trailblazer 55G? | June 3, 2008, 6:36 am |
| Hey Ernie - Miller 212 | August 4, 2008, 5:24 pm |
| BERNARD/MILLER GUN SWAP | May 11, 2007, 9:53 am |
| Miller Econo Twin HF | July 15, 2007, 8:54 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> http://chicago.craigslist.org/tls/161236760.html
>
>
>
>
> Fraser Competition Engines
> Chicago, IL.
>
>
>