|
Posted by Maxwell on May 6, 2008, 3:25 am
Please log in for more thread options
> Ernie Leimkuhler wrote:
>
Thanks for the recommendations guys, I really appreciate it.
Are there an good sources for wire, especially in smaller quantities,
on-line or otherwise?
Availability always seems limit someone's ability to experiment.
|
|
Posted by Ernie Leimkuhler on May 6, 2008, 11:48 pm
Please log in for more thread options
> > Ernie Leimkuhler wrote:
> >
>
> Thanks for the recommendations guys, I really appreciate it.
>
> Are there an good sources for wire, especially in smaller quantities,
> on-line or otherwise?
>
> Availability always seems limit someone's ability to experiment.
>
>
Getting dual-shield wires in small amounts is hard.
Harris is the only company that sells these wires in small spools.
http://www.harrisproductsgroup.com/consumables/alloys.asp?id=12
What I usually do is buy a 30 lb spool of ESAB wire and spool it
myself, if I want to use it in my spoolgun.
You can buy ESAB 7100 Ultra, Dual-Shield wire in sizes down to 0.035".
7100 Ultra is the best Gas Shielded Flux Core wire I have ever used.
|
|
Posted by Maxwell on May 7, 2008, 10:35 am
Please log in for more thread options
>
>> > Ernie Leimkuhler wrote:
>> >
>>
>> Thanks for the recommendations guys, I really appreciate it.
>>
>> Are there an good sources for wire, especially in smaller quantities,
>> on-line or otherwise?
>>
>> Availability always seems limit someone's ability to experiment.
>>
>>
>
> Getting dual-shield wires in small amounts is hard.
>
> Harris is the only company that sells these wires in small spools.
>
> http://www.harrisproductsgroup.com/consumables/alloys.asp?id=12
>
> What I usually do is buy a 30 lb spool of ESAB wire and spool it
> myself, if I want to use it in my spoolgun.
>
> You can buy ESAB 7100 Ultra, Dual-Shield wire in sizes down to 0.035".
> 7100 Ultra is the best Gas Shielded Flux Core wire I have ever used.
Thanks!!
|
|
Posted by on May 7, 2008, 12:27 pm
Please log in for more thread options On Tue, 06 May 2008 20:48:34 -0700, Ernie Leimkuhler
Greetings Ernie,
Can .035 dual shield be used in a Lincoln SP125 Plus? And is it worth
it?
Thanks,
Eric
>
>> > Ernie Leimkuhler wrote:
>> >
>>
>> Thanks for the recommendations guys, I really appreciate it.
>>
>> Are there an good sources for wire, especially in smaller quantities,
>> on-line or otherwise?
>>
>> Availability always seems limit someone's ability to experiment.
>>
>>
>
>Getting dual-shield wires in small amounts is hard.
>
>Harris is the only company that sells these wires in small spools.
>
>http://www.harrisproductsgroup.com/consumables/alloys.asp?id=12
>
>What I usually do is buy a 30 lb spool of ESAB wire and spool it
>myself, if I want to use it in my spoolgun.
>
>You can buy ESAB 7100 Ultra, Dual-Shield wire in sizes down to 0.035".
>7100 Ultra is the best Gas Shielded Flux Core wire I have ever used.
|
|
Posted by Grant Erwin on May 7, 2008, 3:03 pm
Please log in for more thread options Does it show that wire on the chart inside the door?
GWE
etpm@whidbey.com wrote:
> On Tue, 06 May 2008 20:48:34 -0700, Ernie Leimkuhler
>
> Greetings Ernie,
> Can .035 dual shield be used in a Lincoln SP125 Plus? And is it worth
> it?
> Thanks,
> Eric
>
>
>>
>>
>>>
>>>>Ernie Leimkuhler wrote:
>>>>
>>>
>>>Thanks for the recommendations guys, I really appreciate it.
>>>
>>>Are there an good sources for wire, especially in smaller quantities,
>>>on-line or otherwise?
>>>
>>>Availability always seems limit someone's ability to experiment.
>>>
>>>
>>
>>Getting dual-shield wires in small amounts is hard.
>>
>>Harris is the only company that sells these wires in small spools.
>>
>>http://www.harrisproductsgroup.com/consumables/alloys.asp?id=12
>>
>>What I usually do is buy a 30 lb spool of ESAB wire and spool it
>>myself, if I want to use it in my spoolgun.
>>
>>You can buy ESAB 7100 Ultra, Dual-Shield wire in sizes down to 0.035".
>>7100 Ultra is the best Gas Shielded Flux Core wire I have ever used.
>
>
|
| Similar Threads | Posted | | Trying wire feed welding, need some tips | May 5, 2007, 10:15 am |
| Drag wire? | March 21, 2007, 7:13 pm |
| Which TIG wire should I use for 6061 AL | July 11, 2007, 2:33 pm |
| TIG wire feeding | May 22, 2006, 6:08 pm |
| Lincoln 175 and .035 mig wire | May 29, 2006, 6:43 pm |
| Wire difference | June 19, 2008, 5:47 am |
| How To Tac Weld Thermocouple Wire? | March 16, 2007, 11:48 pm |
| mig wire and tips - easy ? | June 18, 2007, 5:59 pm |
| 304 to unknown stainless what wire | July 12, 2007, 2:15 pm |
| alternatives to wire cup brushes | June 1, 2008, 10:06 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>