I don't need no...

Home| Search | About
User Password
Register Now! Lost Password?

Welding Forums - Welding of materials for manufacture & repair. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
I don't need no... Bob La Londe 07-18-2008
Posted by Bob La Londe on July 18, 2008, 4:01 pm
Please log in for more thread options
 ... stinking forklift.

http://img375.imageshack.us/my.php?image=pict0064jb7.jpg



Posted by Stupendous Man on July 18, 2008, 8:40 pm
Please log in for more thread options
> http://img375.imageshack.us/my.php?image=pict0064jb7.jpg

That's how I loaded my new (to me) Miller Dialarc HF-P machne into my
trailer yeserday. Easier than rolling it up a ramp without assistance.
Manual says it weighs 500 Lbs.
It has been sitting in a backroom at work since being replaced by a
Panasonic, so i am familiar with it and it comes with a cooling unit, new
torch, and a full set of collets and cups.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty


Posted by SteveB on July 18, 2008, 11:14 pm
Please log in for more thread options

> ... stinking forklift.
>
> http://img375.imageshack.us/my.php?image=pict0064jb7.jpg

I used a engine hoist to get my Lincoln WeldanPower in and out of my truck
for a few years. Worked good.

Steve



Posted by Bob La Londe on July 18, 2008, 9:40 pm
Please log in for more thread options
>
>> ... stinking forklift.
>>
>> http://img375.imageshack.us/my.php?image=pict0064jb7.jpg
>
> I used a engine hoist to get my Lincoln WeldanPower in and out of my truck
> for a few years. Worked good.
>
> Steve

If I can figure out how to swing my next toy, a small 4wd loader, then I'll
make or buy some forks to slip on the bucket. Shoulda seen the truck
drivers eyes get big though when I said I was gonna unload it with that
boom. The boom at full extension is labeled half ton, so I figured the boom
would handle it as long as it was tall enough, which it was by almost 2 feet
after we got the accessory boxes off the top of the welder.

Bob
www.YumaBassMan.com



Posted by BobH on July 18, 2008, 11:54 pm
Please log in for more thread options
Bob La Londe wrote:
>>> ... stinking forklift.
>>>
>>> http://img375.imageshack.us/my.php?image=pict0064jb7.jpg
>> I used a engine hoist to get my Lincoln WeldanPower in and out of my truck
>> for a few years. Worked good.
>>
>> Steve
>
> If I can figure out how to swing my next toy, a small 4wd loader, then I'll
> make or buy some forks to slip on the bucket. Shoulda seen the truck
> drivers eyes get big though when I said I was gonna unload it with that
> boom. The boom at full extension is labeled half ton, so I figured the boom
> would handle it as long as it was tall enough, which it was by almost 2 feet
> after we got the accessory boxes off the top of the welder.

Cherry pickers are great. I just wish that I had bought my BEFORE I
nuked my back! I use mine a good bit. One of the best $200 I have spent.

BobH


Contact Us | Privacy Policy

XML SitemapXML Sitemap