|
Posted by barry on May 5, 2008, 10:51 pm
Please log in for more thread options
>I have a Lincoln 175 SP Plus. It has a regulator that is in PSI, not cfm.
>I usually set it for 10 psi unless it's a little windy then 15. What do
>you use? Is that anywhere near correct?
>
> Steve
>
> --
> "...the man who really counts in the world is the doer, not the mere
> critic-the man who actually does the work, even if roughly and
> imperfectly, not the man who only talks or writes about how it ought to be
> done." Theodore Roosevelt 1891
>
You should get a "puff" of gas when your push the button/ and release it.
I have a flow meter on mine, with a pressure gauge.
My flow meter reads 15 cmf at 30psi.
Stick out when pressing the switch is about 3/8"
to much gas, you can see, welds aren't that good, to little gas, weld is
difficult
xman
lincoln sp-85 mig
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>I usually set it for 10 psi unless it's a little windy then 15. What do
>you use? Is that anywhere near correct?
>
> Steve
>
> --
> "...the man who really counts in the world is the doer, not the mere
> critic-the man who actually does the work, even if roughly and
> imperfectly, not the man who only talks or writes about how it ought to be
> done." Theodore Roosevelt 1891
>