Neat welding project

Welding Forums - Welding of materials for manufacture & repair. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Neat welding project RoyJ 02-15-2010
Posted by RoyJ on February 15, 2010, 11:23 am
Please log in for more thread options


Over on the old tractor forum:
http://www.tractorshed.com/gallery/trouble/r50250.jpg

Kinda cute!

Posted by steamer on February 15, 2010, 1:55 pm
Please log in for more thread options


>Over on the old tractor forum:
>http://www.tractorshed.com/gallery/trouble/r50250.jpg
        --Now if you could just animate that spider with some hydraulics,
hehe.
--
"Steamboat Ed" Haas : Blue Cross socks us
Hacking the Trailing Edge! : $23,000/yr!! ...
www.nmpproducts.com
---Decks a-wash in a sea of words---

Posted by Steve B on February 21, 2010, 7:53 pm
Please log in for more thread options



>>Over on the old tractor forum:
>>http://www.tractorshed.com/gallery/trouble/r50250.jpg
> --Now if you could just animate that spider with some hydraulics,
> hehe.
> --
> "Steamboat Ed" Haas : Blue Cross socks us
> Hacking the Trailing Edge! : $23,000/yr!! ...
> www.nmpproducts.com
> ---Decks a-wash in a sea of words---

Just a motion sensor, some blinking green eyes, and a vibrator to get him
moving a bit, or run along a track for a couple of feet..........

Steve



Similar ThreadsPosted
Neat little welding project November 18, 2009, 2:41 pm
PICTURES of a recent welding project May 20, 2010, 11:47 am
Storage shelf welding project completed August 26, 2008, 12:32 am
A small welding and lathe turning project July 6, 2010, 2:33 pm
project ideas? November 14, 2009, 10:42 pm
winch - my project - and where next December 4, 2009, 5:28 am
project management australia February 12, 2008, 6:23 am
project management australia February 24, 2008, 7:16 am
A metal table project April 24, 2008, 12:07 am
TIG Cart Project...Source for cabinet/drawers? October 28, 2008, 5:34 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap