|
Posted by Ernie Leimkuhler on October 30, 2008, 10:34 pm
Please log in for more thread options
> I have acquired some stainless SCUBA tank clamp bands that were made for
> tanks a bit larger than the typical 80CF aluminum cylinders. I need to
> cut them down and reweld them to use on my 80CF tanks. The SS alloy of
> the bands is unknown. I need a recommendation on what SS filler to use
> for TIGing them back together. I don't have any SS filler on hand, so I
> have to go shopping no matter what the recommendation is.
>
> Thanks,
>
> Pete C.
They could be 304 SS, but to be safe use 316L or 317L filler.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> tanks a bit larger than the typical 80CF aluminum cylinders. I need to
> cut them down and reweld them to use on my 80CF tanks. The SS alloy of
> the bands is unknown. I need a recommendation on what SS filler to use
> for TIGing them back together. I don't have any SS filler on hand, so I
> have to go shopping no matter what the recommendation is.
>
> Thanks,
>
> Pete C.