|
Welding Forums - Welding of materials for manufacture & repair.
|
|
|
|
|
Posted by RDF on October 8, 2007, 1:56 pm
Please log in for more thread options
Can you supply me with the vin and engine build info. Also do you need the
long block, short block, I may be able to help. Do you want a rebuilt or
just a pull? Where do you need it shipped to? I have a guy with a lot of
Ford Diesel engines in various configurations. And- do you have a
salvageable core to save you some money?
Your E-mail address returns undeliverable btw.
Respects,
Rob
Fraser Competition Engines
Chicago, IL.
> Anyone have the engine for sale?
>
> Thanks
>
>
|
|
Posted by jusme on October 8, 2007, 2:12 pm
Please log in for more thread options
Hi,
Thanks for the reply and thanks for letting me know about the email kicking
back. I think that I have fixed it now.
I am looking for CHEAP. I can give you the vin number of the truck but
don't know what you require for the engine build info other than it is a 7.3
liter. I don't think it is turbocharged.
A 'pull' would be fine if not worn out or high mileage. Yes, I have a
salvageable core. The engine runs but knocks. I figure a broken rod.
I am in Central Texas.
j
> Can you supply me with the vin and engine build info. Also do you need the
> long block, short block, I may be able to help. Do you want a rebuilt or
> just a pull? Where do you need it shipped to? I have a guy with a lot of
> Ford Diesel engines in various configurations. And- do you have a
> salvageable core to save you some money?
> Your E-mail address returns undeliverable btw.
>
> Respects,
>
> Rob
>
> Fraser Competition Engines
> Chicago, IL.
>
>
>> Anyone have the engine for sale?
>>
>> Thanks
>>
>>
>
>
|
|
Posted by RDF on October 8, 2007, 3:46 pm
Please log in for more thread options
> Hi,
>
> Thanks for the reply and thanks for letting me know about the email
> kicking
> back. I think that I have fixed it now.
>
> I am looking for CHEAP. I can give you the vin number of the truck but
> don't know what you require for the engine build info other than it is a
> 7.3
> liter. I don't think it is turbocharged.
>
> A 'pull' would be fine if not worn out or high mileage. Yes, I have a
> salvageable core. The engine runs but knocks. I figure a broken rod.
>
> I am in Central Texas.
>
> j
>
>
>> Can you supply me with the vin and engine build info. Also do you need
>> the long block, short block, I may be able to help. Do you want a rebuilt
>> or just a pull? Where do you need it shipped to? I have a guy with a lot
>> of Ford Diesel engines in various configurations. And- do you have a
>> salvageable core to save you some money?
>> Your E-mail address returns undeliverable btw.
>>
>> Respects,
>>
>> Rob
>>
>> Fraser Competition Engines
>> Chicago, IL.
>>
>>
>>> Anyone have the engine for sale?
>>>
>>> Thanks
>>>
For the accy. hang points. Some of the heads have different boss areas for
such things as alternator mounts, pumps, etc... It's one of the things that
save problems down the road. If it's a rod. Would a short block do the
trick?... Definitely the cheapest way around. The problem is I don't know
mileage but I could easily do a leakdown test on what he has on the shelves.
There are three for sure. I just called him.
Rob
Fraser Competition Engines
Chicago, IL.
PS: Short block is going to be around $350.00 w/core per his shop I have
freight service if you need it. I can get the gasket kit and if you want, I
can do a rebuild ( Crank turn, ball hone, all bearings, rings, and assembly
for around $200.00 on the shortblock. That included a full magmaflux
inspection and alignhone and deck. cam bearings and install is about 40
bucks combined. Assuming all the slugs and rods are Ok.
Rob
Fraser Competition Engines
Chicago, Il.
|
|
Posted by Up North on October 8, 2007, 4:34 pm
Please log in for more thread options
">>
>>> Can you supply me with the vin and engine build info. Also do you need
>>> the long block, short block, I may be able to help. Do you want a
>>> rebuilt or just a pull? Where do you need it shipped to? I have a guy
>>> with a lot of Ford Diesel engines in various configurations. And- do you
>>> have a salvageable core to save you some money?
>>> Your E-mail address returns undeliverable btw.
>>>
>>> Respects,
>>>
>>> Rob
>>>
>>> Fraser Competition Engines
>>> Chicago, IL.
>>>
>>>
>>>> Anyone have the engine for sale?
>>>>
>>>> Thanks
>>>>
>
>
> For the accy. hang points. Some of the heads have different boss areas for
> such things as alternator mounts, pumps, etc... It's one of the things
> that save problems down the road. If it's a rod. Would a short block do
> the trick?... Definitely the cheapest way around. The problem is I don't
> know mileage but I could easily do a leakdown test on what he has on the
> shelves. There are three for sure. I just called him.
>
> Rob
>
>
> Fraser Competition Engines
> Chicago, IL.
>
> PS: Short block is going to be around $350.00 w/core per his shop I
> have freight service if you need it. I can get the gasket kit and if you
> want, I can do a rebuild ( Crank turn, ball hone, all bearings, rings, and
> assembly for around $200.00 on the shortblock. That included a full
> magmaflux inspection and alignhone and deck. cam bearings and install is
> about 40 bucks combined. Assuming all the slugs and rods are Ok.
>
> Rob
>
> Fraser Competition Engines
> Chicago, Il.
Dang! that is cheap for that much work!
|
|
Posted by jusme on October 9, 2007, 11:25 am
Please log in for more thread options Hi,
Thanks for the reply and thanks for letting me know about the email kicking
back. I think that I have fixed it now.
I am looking for CHEAP. I can give you the vin number of the truck but
don't know what you require for the engine build info other than it is a 7.3
liter. I don't think it is turbocharged.
A 'pull' would be fine if not worn out or high mileage. Yes, I have a
salvageable core. The engine runs but knocks. I figure a broken rod.
I am in Central Texas.
j
> Can you supply me with the vin and engine build info. Also do you need the
> long block, short block, I may be able to help. Do you want a rebuilt or
> just a pull? Where do you need it shipped to? I have a guy with a lot of
> Ford Diesel engines in various configurations. And- do you have a
> salvageable core to save you some money?
> Your E-mail address returns undeliverable btw.
>
> Respects,
>
> Rob
>
> Fraser Competition Engines
> Chicago, IL.
>
>
>> Anyone have the engine for sale?
>>
>> Thanks
>>
>>
>
>
|
| Similar Threads | Posted | | OT: I NEED A USED, 1990 7.3 LITER, FORD DIESEL ENGINE | October 8, 2007, 1:05 pm |
| I love Henry Ford ....... | March 24, 2008, 5:32 pm |
| possible to replace the gas engine on old welder? | July 20, 2007, 9:23 pm |
| Small Engine Driven Welders | March 29, 2007, 1:17 pm |
| I finally got a engine driven welder | May 10, 2006, 2:50 pm |
| Continental f163 engine manual? | June 20, 2008, 5:24 am |
| Any old Indian tricks for removing broken studs from aluminum engine head? | May 13, 2007, 1:16 pm |
|
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> Thanks
>
>