|
Posted by SteveB on September 25, 2007, 10:35 am
Please log in for more thread options
>
>>> Have you tried adjusting the nut that holds the spool? Too much or too
>>> little tension and you will have problems. Also make sure the roller
>>> tension is adjusted and that you are using the correct groove for the
>>> size of wire you are running.
>>>
>>> -Bret
>>>
>>
>> Yup. Tried them both, but it seems like an electrical problem, as the
>> roller runs for just a part of a second, then quits altogether.
>>
>> And it is a now and then problem. Not all the time.
>>
>> Steve
>
>
> Sounds to me like a trigger switch problem. It's pretty easy DIY repair.
> You can get the part at just about any Lincoln authorized dealer.
>
> --Jim Walsh
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>> little tension and you will have problems. Also make sure the roller
>> tension is adjusted and that you are using the correct groove for the
>> size of wire you are running.
>>
>> -Bret
>>