|
Posted by Graham P on January 6, 2008, 2:41 am
Please log in for more thread options
I've been told by "Servicedude" on the Miller discussion board that it is
normal to see HF discharge inside a DX200 while the HF is active as there
are discharge points inside there.
Made the trek to the dealer to replace the faulty (leaking) Ar tank and to
get an assortment of electrodes more suitable for alumimum (Ce and La).
I'm going to call Miller to find out for sure about the spooky internal
discharge. Welder seems to be working more or less normally - hard to tell
though, as a beginner without much time to fiddle with the knobs and buttons
(wife wants that attic rebuilt.....)
Thanks for all the advice - Graham P
>
> I would definitely take your machine back to the seller and see if they
> can satisfactorally explain what is happening and / or get it to run
> right.
>
> Good luck, and let us know what happens! I've been thinking about
> getting one of these when I finish my shop....
> --
> Tin Lizzie
> "Elephant: A mouse built to government specifications."-Lazarus Long
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> I would definitely take your machine back to the seller and see if they
> can satisfactorally explain what is happening and / or get it to run
> right.
>
> Good luck, and let us know what happens! I've been thinking about
> getting one of these when I finish my shop....
> --
> Tin Lizzie
> "Elephant: A mouse built to government specifications."-Lazarus Long