Speaking of tack welds

Welding Forums - Welding of materials for manufacture & repair. 

Bookmark this page:   Yahoo!   Google   Windows Live   del.icio.us   digg   Netscape

Subject Author Date Speaking of tack welds Bob La Londe 07-17-2008  Re: Speaking of tack welds Bob La Londe 07-24-2008  Re: Speaking of tack welds Grant Erwin 07-24-2008  Re: Speaking of tack welds Bruce in Bangko... 07-24-2008  Re: Speaking of tack welds SteveB 07-25-2008  Re: Speaking of tack welds Bob La Londe 07-25-2008  Re: Speaking of tack welds Grant Erwin 07-25-2008  Re: Speaking of tack welds Bob La Londe 07-25-2008  Re: Speaking of tack welds SteveB 07-25-2008
Posted by Bob La Londe on July 25, 2008, 11:03 am Please log in for more thread options > > >> >>>I'm still trying to figure out the best way to deal with tac welds. > > What is it exactly you are welding? Hypotheticals. Posted by Grant Erwin on July 25, 2008, 12:14 pm Please log in for more thread options Bob La Londe wrote: > >> >> >>> >>>> I'm still trying to figure out the best way to deal with tac welds. >> >> >> What is it exactly you are welding? > > > Hypotheticals. Oh, those are different. Ignore everything. Posted by Bob La Londe on July 25, 2008, 1:25 pm Please log in for more thread options > Bob La Londe wrote: >> >>> >>> >>>> >>>>> I'm still trying to figure out the best way to deal with tac welds. >>> >>> >>> What is it exactly you are welding? >> >> >> Hypotheticals. > > Oh, those are different. Ignore everything. Yeah, the nice thing about those is you can put 'em together anyway you want. Posted by SteveB on July 25, 2008, 4:48 pm Please log in for more thread options >> >> >>> >>>>I'm still trying to figure out the best way to deal with tac welds. >> >> What is it exactly you are welding? > > Hypotheticals. Are they going to be x rayed or NDT? I'd say for me it has a lot to do with the final weld requirements, the inspector, the specs, and the day of the week. Sometimes you can grind them a bit, and then make them molten again as you run through them. But then, sometimes that makes them crack before you get there. BTW, what kind of rod would you use for that? Steve Similar Threads Posted Speaking of winmiter... May 11, 2006, 1:28 pm T and Corner Welds July 17, 2008, 3:16 pm Re: T and Corner Welds July 18, 2008, 3:16 am tips for finishing stainless welds May 16, 2007, 12:52 pm Cladding 1/2" HY-80 and existing butt welds... October 23, 2007, 4:25 pm ??? How to Make Long Welds Without Expansion Cracking ??? September 14, 2008, 1:22 pm Anyone here have experience with sanitary welds in a brewery? Seattle area. Paying well. April 17, 2007, 4:17 pm